How To Calibrate And Set Up The Dynamic Industrial Checkweigher?

Mar 01,2024

How To Calibrate And Set Up The Dynamic Industrial Checkweigher?

Before using the dynamic industrial checkweighers, make sure you have read the operating manual provided by the manufacturer carefully, and understand the calibration process and related security precautions. The following is a universal dynamic checkweighers calibration setting process, but please note that the specific steps may be different according to different equipment models and manufacturers.

Take our Shigan's dynamic checkweigher as an example:
1. Preheating: Before starting the calibration, let the dynamic high speed checkweigher preheat at least 10 minutes to ensure that all weighing components (such as weighing the sensor and the controller) have reached a hot state.
2. Place the weight: Place the calibration weight on the inline check weigher machine of the weight scale to ensure that the positioning position of the weight is accurate in the center of the checkweigher.
3. Enter weight weight: Enter the known weight value of the weight of the weight by checking the touch screen or the keyboard of the automatic checkweigher.
4. Start calibration: Operate according to the prompts on the touch screen, usually there are steps of "empty load calibration" and "loading calibration". In the "empty load calibration" step, make sure that the scale has no weight, and then press the corresponding button. In the "Loading" step, press the button and press the button.
Examination results: Wait a period of time to ensure that the reading of the dynamic industrial checkweigher is stable, and then check whether the real -time weight displayed is consistent with the nominal weight of the size. If there is a significant difference, you may need to be adjusted or re -calibrated.
5. Repeat steps: If the calibration is inaccurate, repeat the above steps until the weight displayed by the dynamic industrial checkweigher matches the actual weight of the weight.
6. Complete the calibration: Once the weight displayed by the check -in scale is consistent with the weight of the weight, the calibration process is completed. You can start using a dynamic industrial checkweigher for the weight of the product.
7. Record the definition date: Make sure the date of the record calibration is to track the verification cycle and maintenance time in the future.

Please note that the calibration is a precise process, which requires the carefulness and patience of the operator. If you are not sure how to calibrate, or the calibration is unsuccessful, it is recommended to contact the manufacturer's technical support for help. The frequency of calibration depends on the use of the dynamic industrial checkweigher and the recommendation of the manufacturer, but in general, the calibration should be performed in the device after installation, any main maintenance or repair, and within the periodic interval.